Is it easy to install a bobbin in a sewing machine? I will answer you, “yes.” It’s a small reel of thread that is just begging to be put into work. With the help of this simple guide it will not be difficult for you to install it.
The bobbin feeds the lower thread when sewing, which provides a beautiful stitch on your products.
Today I will install the bobbin into a Singer Quantum Stylist 9960 sewing machine and show you how to do it.
In order to insert it into the sewing machine, it is important for the bobbin to be properly wound (the threads must fill the bobbin evenly).
Step 1. Turn off the sewing machine.
Step 2. Raise the needle up using the handwheel.
Step 3. Lift up the presser foot lever.
Or you can remove the foot by pressing the button on the back.
Step 4. Remove the bobbin cover by pressing the button to the right and lift the cover.
Step 5. Insert the bobbin in such a way that if you pull the thread, it will rotate counterclockwise.
Step 6. Pull the thread through the slit, as shown by the red line on the picture.
Step 7. Leave about 15 cm of the thread to stick out, place the thread under the presser foot.
Step 8. Close the bobbin case. Put the cover at its place and push the right side of it until it clicks.
We did it, and I think you did it too.
Dare and do not stop!